If you’re already familiar with basic machining, plunge milling is like adding a powerful tool to your toolkit. Unlike regular cutting, which happens around the edges, plunge milling operations are done right at the end of the tooling.
Now, why is this important? Imagine you have a long tool sticking out or dealing with tricky materials like titanium – plunge milling becomes the hero. It’s like a backup plan when things get tough, and other methods don’t quite work.
You might be thinking, “I know the basics, why bother with plunge cutting?” Well, here’s the deal: While it might not be the fastest way to remove metal under normal conditions, plunge milling shines in situations where other methods struggle.
Hence, to help you make the most of this CNC machining approach, this article will delve deeper into the concepts and machining approaches of plunge milling. So keep reading to learn all about it!
What to Know About The Cutting Process?
Understanding the cutting process is key. Unlike traditional milling, where radial forces dominate, plunge milling involves axial cutting forces. The process can be likened to interrupted boring, demanding a different approach to programming table feed and rapid traverse.
Plunge Milling Tips and Techniques
To make the most of plunge milling operations, consider these practical tips:
- Opt for a horizontal machine for better chip evacuation.
- Begin milling from the bottom and work your way up.
- Use cutting fluid or compressed air to aid chip evacuation.
- Compared to traditional methods, plunge cutting requires a lower feed per tooth.
- Engage more than one tooth for enhanced efficiency.
- Leverage extra-close pitch cutters for improved performance.
- Gradually decrease plunge depth to minimize vibration.
- Utilize a “hook program” to prevent re-cutting on the return stroke.
- Maintain a constant stock for subsequent finishing operations.
Application Scenarios: Slots, Cavities, Corners
Once you understand the plunge milling operation’s importance, use the plunge-cutting technique and make the most of it. But when? Here are some specific scenarios where plunge milling proves beneficial:
- Slots: Ideal for machining deep and closed slots. Effective chip evacuation is essential.
- Cavities/Pockets: Critical for chip evacuation, especially in closed slotting. Consider a horizontal setup and cutting fluid for improved results.
- Corners: Advantages in plunge milling operations for rest milling after roughing operations in deep 90-degree corners.
Feeds and Speeds in Plunge Milling Operation
Are you not yet familiar with plunge milling speeds and feeds? Let’s go ahead and explore the X and Y stepovers, feeds, and speeds then—essential elements for successful plunge milling.
X and Y Stepovers
To get started, let’s decide on the X and Y stepovers. According to Sandvik, a good starting point for the sideways motion is 80 percent of the cutter diameter. This helps prevent skinny stalks from sticking up in the corners between the holes.
Example of Roughing Out a Pocket
To better understand how plunge milling feeds and speeds, let’s consider an example where you have the task of roughing out a pocket with 1/8-inch corner radii. In this task, you have a limited end mill diameter of 1/4 inch and a pocket of 1 1/2 inches deep.
Here, using X and Y stepovers of 0.0625 inches, you can check feeds and speeds with G-code editor. Once you check, you may find a decent material removal rate but higher deflection, risking tool damage.
You can turn to the Plunge Milling Mini-Calc in this situation. This mini-calc allows us to enter Step Up and Step Over values, adjusting the feed rate accordingly.
After using a G-code editor for CNC machines, you will see that the material removal rate is back to an efficient level. Moreover, deflection will become less of a concern since you’re plunging.
Ultimately, this shows how plunge cutting emerges as a valuable technique in the manufacturing industry that solves various challenges and optimizes efficiency. All you need is to implement the right approach to X and Y stepovers and understand feeds and speeds better to implement this machining approach per your specific needs.
Unraveling CAM Packages and Techniques
Speaking of CNC machining coding and software used for plunge milling operations, we can’t miss exploring the ins and outs of plunge cutting, plunge milling operations, and the essential CAM packages you need to know about. So, let’s explore that further below.
Plunge Cutting 101
Let’s start with the basics—plunge cutting. This process is like making a straight, vertical cut into the material, almost like a direct downward motion. This technique is handy for creating features with a flat bottom.
Beyond basic plunge cutting, advanced plunge milling operations add a dynamic element to the manufacturing process. But, instead of a flat-bottomed cut, plunge cutting allows for a more versatile 3D cut. This is especially beneficial for intricate designs and varied surfaces.
Some additional facets of plunge milling that should be considered in this cutting process include:
Vertical Milling:
When we say 縦フライス, the tool moves up and down like a seesaw. It’s a vertical dance allowing precise cuts and efficient material removal. Vertical milling is a must-know for any aspiring machinist.
Direct Milling:
Direct milling is the shortcut you’ve been looking for. It’s straightforward, almost like going straight to the point without any detours. When time is of the essence, direct milling is your go-to move.
Straight Down Milling:
Straight Down milling is like a no-nonsense friend who gets things done efficiently. It’s a technique where the cutter moves straight down into the material with no fuss, no frills—just pure effectiveness.
Z-axis Machining:
Z-axis machining is all about mastering the vertical dimension. It brings depth and precision to your cuts, taking your milling game to new heights.
Plunge Routing:
Plunge routing is your guide through the material maze. It involves making strategic cuts by plunging into the material at specific points. Think of it as the navigator ensuring you take the right route.
Deep Milling:
When you want to go beneath the surface, deep milling is your strategy. It’s all about making substantial cuts and exploring the depths of your material. Deep milling is your ticket to uncovering hidden potentials.
Vertical Plunge:
A vertical plunge is like a controlled dive into the material. It’s a precise downward movement that allows you to navigate with finesse. Vertical plunge is the secret to achieving accuracy in your machining adventures.
Direct Cut Milling:
Last but not least, direct-cut milling is the epitome of efficiency. It’s a technique that gets straight to the business of cutting, ensuring every move counts. When you’re aiming for effectiveness, direct-cut milling is your ally.
How to Pick the Right CAM Package?
Now that you know the plunge-milling family, let’s talk CAM packages. To choose the right CAM package for plunge milling toolpaths when operating a CNC machine, you need to:
Check if your CAM package supports true 3D or sticks to 2D plunge milling. True 3D provides more versatility, while 2D works for flat-bottomed features.
Another key consideration is how the plunge cycle retracts from the wall during the overall retraction. This clever technique, as often seen in the Plunge Rough retract style, reduces chatter and boosts tool life.
Conclusion: Plunge Milling Mastery
In the manufacturing landscape, where every cut counts, plunge milling offers unparalleled benefits. From its ability to reduce deflection and enhance tool life to its efficiency in machining tough materials, plunge milling is a versatile and indispensable technique.
It’s the key to unlocking intricate designs, maximizing material removal rates, and ensuring a superior surface finish. But, when you proceed with plunge milling operations, remember that even the most skilled craftsmen benefit from professional support. And if you’re ever stuck, we have your back as professional CNC manufacturers in the business for years now.
で プロトツール, a trusted name in precision manufacturing, we offer various CNC manufacturing services, custom manufacturing, and 射出成形サービス. Whether you need guidance on tool selection, advice on optimizing feeds and speeds, or comprehensive assistance in implementing plunge milling techniques, Prototool is your dedicated partner.
JA 
EN 
FR 
ES 
DE 
AR 
PT 
HI